This is a stereo transmitter! Just connect a cassette deck, CD player, MP3 player or mixer panel to the FM-10A's line level inputs and you're on-the-air with a school, dorm, camp, home, church or neighborhood FM station. Tunable anywhere in standard FM band... 88 to 108 MHz Operates on 5 to 15V DC Standard line level inputs with RCA phono jacks Settable pre-emphasis 50 or 75 Sec for use anywhere in the world Adjustable input sensitivity and stereo balance Easy to build, low cost transmitter FCC Approved RF Output: 10mW Range: up to 200 feet The FM-10A has plenty of power and our manual goes into great detail outlining all the aspects of antennas, transmitting range and the FCC rules and regulations. You'll be amazed at the exceptional audio quality of the FM-10A, in fact, your station will sound better than most stations on the dial! This is because in their quest for ever higher ratings, FM broadcasters crank up the average level of their modulating signal in order to sound 'louder'. This produces noticeably more muddy and constrained sound than your signal! Whether you set up a wireless extension of your home stereo, dorm radio station, or simply transmit radio calls (2 meters on the left, 440 on the right - stereo, remember?) you'll find lots of fun and satisfying uses for this most popular kit. Runs on internal 9V battery or external power from 5 to 15V DC. Optional kits are Small antenna and Case (size 5"w x 1-1/2"h x 5-1/4"d), 12V AC adapter. The kit includes Transmitter, Case, and small Antenna. The kit can be ordered assembled (like the picture). You must choose a frequency between these 3 ranges: 88-94, 91-100, or 95-108Mhz (We need to know which range when we assemble the unit, it can always be changed later by switching a capacitor).
|
